The cam lock consists of locking pin and locking arm on opposite edges. It is plastic or steel and has great strength and no complicated ribs are needed. The cam lock is mbedded into panels during foaming. The panels can be connected closely when you turn clockwise the cam locks by special tool which is provided with the cold room. To expand the volume of cold room, you can simply remove the panel where size increasing is desired turning the cam lock back from our works. It is easy to enlarge prefab cold room quickly. At the same time, we can produce according to your given drawings or samples.

Our cam lock ore designed for assembly of the PUF partition with perfetct alignment of the wall and ceilings floor, corness and door frames, leaver of cam lock is made of vergine nylon and bosy of cam lock is made of HIPS a high grade of plastic, our cam locks are suitable for 25mm to 120 mm thickness of pannels.

For Specification & Product Drawing download product e-catalouge
Copyright Altos Engineers Private Limited 2013 | All rights reserved